Sore eyes after welding or UV light: photokeratitis, what helps that night and when to see a doctor
You felt fine after the welding job. Then, hours later, both eyes feel full of sand and light hurts. The cause is a burn on the front of the eye, it is common, and it usually heals by itself. This page covers what helps that night, what I would not do, and the signs that mean a doctor today.
See a doctor the same day if…I see parents and grandparents for squint, cataract and everyday eye problems, I operate on squint and cataract, and I perform LASIK, SMILE and Presbyond for adults, so one family can keep one eye doctor. Family eye care Where I practise
- Ultraviolet light from a welding arc, a tanning bed or snow glare burns the front of the eye, and the pain usually starts hours later, not at once: the NHS Wales leaflet says up to 6 to 12 hours.
- The American Academy of Ophthalmology says photokeratitis usually goes away on its own in a day or two, so the aim at home is comfort: take out contact lenses, a dim room, a cold cloth over closed eyes and lubricating drops.
- Do not rub the eye, do not use leftover numbing drops, and do not put milk or tea bags in it. None of the sources lists them.
- See an eye doctor the same day if vision is not clearing, pain is strong after 24 to 48 hours, a chemical or metal fragment may be in the eye, or the work involved grinding or cutting.
- A welding helmet or goggles with the proper filter prevent it. Ordinary sunglasses are not named for welding, and people standing nearby need protecting too.
You finished the welding job, felt fine, and went to bed. At two in the morning both eyes feel full of sand and the light hurts. It is frightening, and it is also one of the more predictable eye problems. This page explains why it starts late, what helps that night, what I would not do, and the signs that mean seeing a doctor the same day. It is written for adults, and it also covers a child who watched the welding.
Why does my eye hurt hours after welding or a UV lamp?
Because ultraviolet (UV) light burns the clear front surface of the eye, and that burn is not felt straight away. The American Academy of Ophthalmology (AAO) calls photokeratitis "like having a sunburned eye". It affects the cornea, the clear window at the front of the eye, and the conjunctiva, the thin layer over the white. Like sunburn on skin, it is not usually noticed until well after the damage is done.
An NHS Wales patient leaflet says the pain may not appear until 6 to 12 hours after the exposure. A report of four children hurt by theatre lamps found symptoms about 4 hours later. So the eye feeling fine at the end of the job tells you nothing. The common name for the welding version is arc eye, or welder's flash.
What causes it besides welding?
Any strong source of UV. The AAO lists sunlight reflected from sand, water, ice and snow, tanning lamps and tanning beds, and arc welding. The NHS Wales leaflet adds photographic flood lamps and halogen desk lamps. The AAO says tanning beds can give off UV at up to 100 times the level of the sun.
The longer the exposure, the worse the symptoms, says the AAO. One more point so it is not confused: staring at the sun or an eclipse can burn the retina at the back of the eye. The AAO says that damage lasts longer and is more serious than a surface burn. That is a different problem, and it needs an eye doctor.
What does photokeratitis feel like?
Pain, redness, tearing and a gritty feeling, usually in both eyes, and light that is hard to bear. The AAO list is longer: blurred vision, swelling of the lids, headache, seeing halos, small pupils and eyelid twitching. It says that rarely there is temporary loss of vision.
The NHS Wales leaflet says vision usually comes back after about 18 hours. Both eyes at once, and a clear history of a bright arc or lamp, point to photokeratitis. One painful eye, or a history of grinding, hammering or a spark, points elsewhere (see the same-day section below).
What helps that night?
Take out contact lenses, rest the eyes in a dim room, and use cold and lubrication. The AAO says photokeratitis usually goes away on its own, so the aim is comfort while the surface heals.
Its advice is to remove contact lenses at once, get out of bright light into a dark room, and consider a cold washcloth over the closed eyes and artificial tears (lubricating drops). The NHS Wales leaflet says to keep the eye closed and rested, and that simple painkillers such as paracetamol can ease the pain, without going above the stated daily dose.
A few practical points from the clinic. Use preservative-free lubricating drops if you have them, as often as comfortable. Wear sunglasses indoors if light hurts. Sleep if you can, because the surface heals while the eyes are closed.
Healing is quick. The AAO says symptoms usually go gradually in a day or two. The NHS Wales leaflet says the cornea usually heals with no long-term problems within 24 to 48 hours. The Malaysian Department of Occupational Safety and Health (DOSH) says in its lighting guideline that, unless the exposure was excessive, the condition is temporary and heals within two days.
Should I rub, use numbing drops, or put milk in the eye?
No to all three. Rubbing is not helpful: the AAO says to avoid rubbing your eyes as you heal, and the NHS says not to touch or rub an injured eye until it is better. The surface of the cornea is already raw, and rubbing can make it worse.
Numbing (anaesthetic) drops take the pain away for a short time, which is why people ask about them. I do not send anyone home with them. The numbing also hides the pain that tells you the eye is healing or going wrong, and repeated use can itself harm the cornea. If a doctor uses a numbing drop to examine you in the clinic, that is a different thing.
As for milk, tea bags and similar home remedies, none of the sources I read lists them. The AAO list is cold cloth and artificial tears. A tea bag or a cup of milk near an injured cornea only adds germs. The page on breast milk in a sticky eye explains why that idea keeps coming back and what the evidence says.
When do I need a doctor the same day?
When the pain or the vision is not behaving like a simple flash burn, or the injury was more than light. See an eye doctor the same day if:
- Your vision is not clearing, or it is getting worse, or it is blurred in one eye only.
- The pain is still strong after 24 to 48 hours, or it comes back after easing.
- The injury involved grinding, cutting metal or a spark or fragment. A flying piece of metal can sit on or in the eye, and welding and grinding often happen together.
- A chemical, fume or hot liquid got into the eye. The NHS says to go to A&E for a strong chemical, and to keep rinsing on the way.
- Something hit the eye at high speed, or the eye cannot be opened or moved, or there is blood or pus.
- You have severe headache, nausea or vomiting after the injury, or the eye is very red and swollen with a sticky discharge.
Do not try to pick out anything stuck in the eye. The pages on a speck in the eye and on a chemical splash give the first steps, and they apply to adults too.
The doctor looks at the cornea with a special dye and a bright blue light, which shows the burnt patches. If it is only photokeratitis, the treatment is the same as at home, sometimes with antibiotic drops if the doctor thinks they are needed. The AAO says antibiotic drops are used only if the ophthalmologist recommends them.
What if a child watched the welding or a UV lamp?
A child can get the same burn, and the same delay applies. The four children in the theatre report were aged 9 to 13, all had both eyes affected, and they arrived at the emergency department within an hour of each other, about 4 hours after the show. Their eyes were clear two days later.
So if your child watched a welder, a bright lamp or a long day on snow or sand, and wakes at night crying with sore, streaming eyes, think of this. Dim the room, take out any contact lenses, and use a cool damp cloth over closed eyes and lubricating drops. Give paracetamol only at the dose on the label for the child's age. A child who is very distressed, has pain that is not settling, or has vision that does not clear should be seen the same day.
How do I stop it happening again?
Use the right shield, every time, even for a quick weld. The AAO names welding helmets for welding, and the NHS Wales leaflet names welding goggles with the proper filters and a welder's helmet. Ordinary sunglasses are not on either list for welding, so I would not rely on them. The DOSH personal protective equipment guideline says the eyes and face must be protected against welding arcs, including their sparks, fumes and ultraviolet radiation.
People standing nearby need protecting too. Keep bystanders and children away, or give them the same shield. For other sources of UV, wear sunglasses that block 99 percent or more of UV, snow goggles on bright snow, and the goggles made for a tanning bed. The page on sun protection for children's eyes covers hats, sunglasses and the Malaysian haze, and eye safety at home covers the other accidents I see.
If you have a red eye and none of this fits, a red eye in a parent sorts the common causes.
- Your vision is not clearing, is getting worse, or is blurred in one eye only.
- The pain is still strong after 24 to 48 hours, or it comes back after easing.
- The job involved grinding, cutting metal or flying sparks, or you think a fragment is in the eye.
- A chemical, fume or hot liquid got into the eye (keep rinsing with water on the way).
- The eye cannot be opened or moved, you have severe headache, nausea or vomiting, or you see blood or pus.
Common questions
Why does my eye hurt hours after welding?
How long does arc eye last?
What can I do at home for welding flash?
Can I use numbing eye drops, milk or a tea bag?
When should I go to the doctor after welding flash?
My child watched someone welding. Can that hurt their eyes?
Do sunglasses protect against welding flash?
- American Academy of Ophthalmology · What is photokeratitis, including snow blindness? · www.aao.org (opens in a new tab)
- American Academy of Ophthalmology · Indoor tanning eye safety · www.aao.org (opens in a new tab)
- NHS Wales 111 · Photokeratitis (arc eye or welder's flash), patient leaflet · 111.wales.nhs.uk (opens in a new tab)
- NHS · Eye injuries · www.nhs.uk (opens in a new tab)
- PubMed Central · Four cases of paediatric photokeratitis after the same theatre show · pmc.ncbi.nlm.nih.gov (opens in a new tab)
- DOSH Malaysia · Guidelines for the use of personal protective equipment against hazardous chemicals (eye and face protection, welding arcs) · dosh.gov.my (opens in a new tab)
- DOSH Malaysia · Garis panduan keselamatan dan kesihatan pekerjaan untuk pencahayaan di tempat kerja (ultraviolet radiation and arc eye) · dosh.gov.my (opens in a new tab)
